A clean carpet plays an important role in transforming your home and making the inside environment healthier. From planning big events to dealing with spills and keeping your home neat – maintaining carpets is essential. You can enjoy their beauty and comfort under your feet if you regularly clean them without negligence. You can do it yourself or contact professionals for carpet cleaning in Melbourne CBD. Each method has its pros and cons. Today, we will explore the carpet cleaning checklist and how it helps make your carpets look their best.
Follow the below steps whenever you plan to clean the carpets:
Collect All the Cleaning Supplies
Before you start the cleaning process, make sure you have all the supplies – from vacuum cleaners to dust cloths and cleaning solutions.
When picking a vacuum cleaner, ensure that it has a HEPA filter so that it catches dust faster and better. Choose a carpet shampoo or cleaner that is suitable for your carpet type. You should also have a spot cleaner to treat unexpected spills and baking soda for neutralising odours.
Other items that you need are white vinegar, a soft brush, microfiber clothes, a bucket, a sponge, and lint rollers. All these supplies will come in handy when you are deep cleaning the carpets.
First do Vacuuming
The first step in cleaning your carpets is vacuuming. Doing it will remove loose dirt, dust and debris – it can also suck the dirt that’s embedded deep in the carpet layers. As part of regular carpet cleaning, you have to vacuum at least once a week. You may have to increase the frequency depending on the high foot traffic and if you have any pets.
You also have to follow a technique when vacuuming – cover each area slowly and vacuum in multiple directions so that it sucks all the dirt. Make sure no kids or pets are running around while you are vacuuming.
Stain and Spill Treatment
It’s essential to treat stains and spills immediately so that they won’t become a permanent mark. They are also to be removed in the early stage.
You should blot over the stain instead of rubbing it so that you are not spreading the stain to a large area. rubbing will also push the stain deeper which becomes difficult to remove. Use a clean cloth or paper towel to blot the stain.
After blotting, you can apply a stain remover depending on the material of your carpet. Or you can prepare a DIY cleaning solution by mixing white vinegar and water. It can work wonders on fresh stains.
To avoid damaging the carpet with the cleaning solution, it’s always better to test on a small, corner area to check whether there are any adverse effects on the carpet.
Deep Clean the Carpets
While regular cleaning is essential, deep cleaning of the carpet is equally necessary to maintain the freshness of carpets. Various methods like steam cleaning, dry cleaning and shampooing help restore the former glory of your carpets. Before employing any deep cleaning technique, ensure that you have sufficient knowledge and equipment to proceed. Otherwise, it’s better to contact professionals for carpet cleaning, especially when you are moving out of a rental property and have to deep clean the home before leaving.
Deodorising is Important
Deodorising carpets is mandatory to remove bad smells from the carpet. For this, you can use baking soda and vinegar as they are excellent agents in removing bad odours. First, sprinkle soda over the carpet and vacuum it after leaving it for 15 minutes or overnight depending on the odour intensity.
Or you can spray vinegar and water mix on the carpet and let it dry. Later, you can vacuum it as vinegar will absorb bad smells with it. Deodorising will ensure that your carpets smell fresh and look great after vacuuming.
Carpet Maintenance
To keep the carpets always looking new at your home, proper maintenance is necessary. Apart from vacuuming and deep cleaning, you have to ensure that excess dirt is not collected on carpets. For this, you have to place rugs or mats at the entryways so that you can prevent the dirt from spreading throughout your home.
You should also protect high-traffic areas by placing runners and area rugs so that your carpets are protected from early damage and wear and tear. Finally, you have to move furniture from time to time to prevent uneven wear and tear. It will also expose the entire area for carpet cleaning.
Final Thoughts
When you contact professionals for upholstery cleaning in Melbourne CBD, you can enquire about the carpet cleaning process as well. Early detection of issues like loose fibres, consistent smell, and fraying needs to be addressed immediately so that you can protect the carpets from further damage. When you follow the above checklist thoroughly, you can keep the carpets fresh and neat for as long as you want.